mono.jpg


  • Several decades of experience in manufacturing, the complete PV chain including silicon materials, ingot, wafer, solar glass, solar cell and module, and ISO90001 & ISO14001 certified factory, ensure excellent raw materials and production control.

  • Modules certified by TUV Rheinland (IEC61215, IEC 61730 standards) in the extreme conditions (temperature, load, impact) with good performance. Pass strict tests of solar modules including Salt-mist Corrosion Test, Fire Test, Ammonia Resistance Test, PID Test, Sand Abrasion Test and Carbon Footprint Assessment in TUV.

  • The good weak light performance (morning, evening and cloudy day) has been tested and approved by professional third-party.

  • Guaranteeing from 0 to +6W as power tolerance, customers can obtain 5.8% power more than conventional output.

  • 100% EL test before and after lamination, and finished products EL test, providing higher quality assurance.



图层 1 拷贝.png



For a period of twenty-five (25)years commencing on the Warranty Start Date, loss of power output of the nominal power output measured at Standard Test Conditions (STC) for the Product(s) shall not exceed:

  1. For Polycrystalline Products: 2.5% in the first year, thereafter 0.7% per year,ending with 80.7% in the 25th year after the Warranty Start Date.

  2. For Monocrystalline Products: 3 % in the first year, thereafter 0.7% per year, ending with 80.2% in the 25th year after the Warranty Start Date.

PDF下载.pngMono-crystalline solar manual